• +604-608 4505 | +6017-907 5129
  • marketing@elitesensor.net | inquiry@elitesensor.net
V20-RO-A3-R-M-M2-AL-P1-40

Share:


V20-RO-A3-R-M-M2-AL-P1-40



Specifications

Image chip type: Monochrome

Light spot size [mm]: 2 x 5

Explanation of light spot size: une distance de 150 mm

Switching frequency ≤ [Hz]: ≤ 100

Light source: LED

Light color: Red

Wavelength [nm]: 625

LED risk category [RG]: 0

Explanation of risk category: Nach EN 62471

Projector laser: Laser red (635 nm), Class 2 (IEC 60825-1)

Resolution: HDV2

Number of pixels (H x V) [px]: 1440 x 1080

Imaging chip technology: CMOS

Sensor size ["]: 1/2.9

Pixel size [µm]: 3.45

Field of view type: Medium

Focal length [mm]: 12.0

Opening angle [°]: 24.0

Min. field of view (X x Y) [mm]: 10 x 8

Aperture number: 2.8

Depth of field: Standard

Focus drive: Motorized

Target laser: Laser rot (655 nm)

Laser class: 1 (IEC 60825-1)

Network protocol: TCP/IP, Profinet, EtherNet/IP, sFTP, SMB, FTP, Service Port

Max. number of jobs: 255

Max. number of detectors: 255

Alignment: Contour comparison, Pattern matching, Edge detection

Available detectors: Pattern matching, Contour, BLOB, Brightness, Contrast, Gray level, Caliper, Distance

Available detectors: Pattern matching, Contour, BLOB, Target mark (3D), Brightness, Contrast, Gray level, Caliper

Result processing: Numbers, Robotics

Pre-processing: Arrangement, Filter

Calibration: Board (measurement), Board (robotics), Scaling (measurement), Point pair list (robotics)

Robotic functions: Gripper clearance check, Result offset, image coordinates, Result offset 2D, Result offset 3D

Additional functions: Archiving, Image transmission, individual overlays, Multiple image acquisition, Multiple detection for contour and pattern matching detector, Multiple detection for detector contour (3D), Job checksum

Hardware: VISOR

Warm-up time [Min.]: 20

Temperature profile [mm/K]: 0.01

Typical current draw [mA]: 350

Type of voltage source: The device must be supplied by a "Class 2" power supply unit.

Readiness delay [ms]: ≤ 16,000

Reverse polarity protection: Yes

Overvoltage protection: No

Residual ripple [%]: ≤ 5 Vss, level 3

Explanation of residual ripple: EN 61000-4-17

Polarity: PNP/NPN

Short circuit protection: Yes

Input threshold (High): > UB-1V

Input threshold (Low): < 3V

Input resistance [kΩ]: > 20

Max. output current [mA]: 50

Explanation of max. output current: max. 100 mA on pin 12

Inductive loads: Typ.: Relay 17 K / 2 H, pneumatic valve 1.4 K / 190 mH

Max. output current (total) [mA]: 200

Ethernet transmission rate [Mbit/s]: 100

Number of switchable IOs: 6

Number of outputs: 2

Number of inputs: 2

Encoder functions: Yes

Height [mm]: 85

Height [mm]: 85.0

Length [mm]: 45

Length [mm]: 45.0

Width [mm]: 76.4

Width [mm]: 45.0

Weight [g]: 490

Weight [g]: ~ 220

Front panel material: PMMA

Front panel material: PMMA

Housing material: Aluminum (cast)

Housing material: Aluminum (cast)

Connection name: Supply

Connection name: LAN

- Number of pins: 12

- Number of pins: 4

- Coding: A

- Coding: D

- Thread: M12x1

- Thread: M12x1

- Material: Metal

- Material: Metal

- Type: Plug

- Type: Socket

Explanation of ambient temperature: storage: < 95 % humidity, non-condensing

Explanation of ambient temperature: storage: < 95 % humidity, non-condensing

Protection class: IP 65, IP 67

Protection class: IP 65, IP 67

Explanation of protection class: For C-mount devices, only in combination with protective tube

Explanation of protection class: For C-mount devices, only in combination with protective tube

Explanation of protection class: For C-mount devices, only in combination with protective tube

Explanation of protection class: For C-mount devices, only in combination with protective tube

Vibration and shock resistance: EN 60068-2-6, EN 60068-2-27

Vibration and shock resistance: EN 60068-2-6, EN 60068-2-27


Short description:

VISOR® V20 Robotic +Z, Advanced, 255 jobs each with 255 detectors, red illumination, medium field of view, motorized focus, LAN interface, target laser, distance measurement range 150…2500 mm

Description

Applications

 

  • Detecting objects
  • Measurement
  • Identify
  • Positioning

255 jobs with 255 detectors each

 

  • Alignment: X/Y and orientation
  • Pattern matching, contours, target mark 3D: Teach-in and detection of patterns, contours and 3D poses
  • Caliper: Distance between edges
  • BLOB, gray threshold, brightness: Evaluation of brightness
  • Contrast: Evaluation of the contrast
  • Result processing: Text, Math: Monitoring and calculating detector results


 Inquiry - V20-RO-A3-R-M-M2-AL-P1-40